Market Volume of Auto Panel Die Will Grow
- Aug 13, 2019
- Hits: 10
With development strength of new vehicle models speeding up, the number of new vehicles put in market is increasing. In the future, the market volume of auto panel die will highly grow with the growth...
Gas Injection Used for Magnesium Die Casting
- Aug 13, 2019
- Hits: 9
It is reported that the researchers in Aalen University, Germany use gas injection in hot chamber die casting for manufacturing magnesium die casting with hollow structure. Light materials...
Reasons Causing Black on Aluminum Alloy Die Casting
- Aug 13, 2019
- Hits: 6
Aluminum alloy die casting usually uses permanent mold casting. Both aluminum and its alloy have good rheology and plasticity. However, aluminum alloy blackens easily during usage. Reasons...
EU Canceled Anti-dumping Measures on Steel Fasteners
- Aug 13, 2019
- Hits: 7
On February 27, 2016, European Commission announced that according to relevant tribunals from dispute settlement body of WTO, European Union would decide to cancel the anti-dumping measures on steel fasteners...
Reasons Causing Blister on Zinc Alloy Die Castings
- Aug 13, 2019
- Hits: 9
At present, zinc alloy die castings have widely applied in decoration such as furniture fittings, architectural ornament, bathroom accessories, toys, tie pins, belt fasteners and other metal buckles....
Fastener Industry in China Mainland and Taiwan
- Aug 13, 2019
- Hits: 5
At present, China mainland is the largest fastener manufacturer in the world, and the U.S. and EU are the most important consumers. Taiwan is the most important production partner. For comparison of fastener...
Aluminum Alloy Deep Processing Pushing Light Weight
- Aug 13, 2019
- Hits: 17
Light weight is inevitable trend of auto developing and aluminum alloy deep processing technology has already been mature, expected to promote light weight of auto. Made in China 2025 Strategy points...
Quality of Electroplating on Zinc Alloy Die Castings
- Aug 13, 2019
- Hits: 8
In North America and Europe market, the quality of electroplating on high-end zinc alloy die castings should meet the requirements of ASTM G58 that pass though non-defects test in acid salt fog for 48...
Surface Treatments Used for Aluminum Street Lamp Cover
- Aug 13, 2019
- Hits: 11
Electrophoresis and powder spraying are two surface treatments used for aluminum die casting street lamp cover, high improving corrosion resistance and service life. The technology that charged particles...
Impacts of Vacuum Die Casting Technology on Aluminum Alloy Die Castings
- Aug 13, 2019
- Hits: 6
Aluminum alloy die casting is the casting process that injecting the high temperature molten aluminum alloy liquid into die cavity with high pressure and high speed for moulding. Features of this casting...
International Copper Grades Table
- Aug 13, 2019
- Hits: 69
Copper Grades Table Material Name Grades GB JIS ASTM ISO DIN BS NF ГОСТ Red Copper Fine Copper T2 C1100 Cl 1000 Cu-FRHC E-Cu58 C101/C102 Cu-FRHC Ml T3 — — Cu-FRTP — C104 Cu-FKTP...
Stainless Steel Grades Comparison Table
- Aug 13, 2019
- Hits: 8
China GB1220 Japan JIS America AISI ASTM England BS9706 S1449 Germany DIN17440 DIN17224 France NF A 35-572 NF A 35-576-582 NF A35-584 1Cr17Ni7 SUS301 301,S30100 301S21 Z12CN17.7 0Cr18Ni9...