Page 6 of Die Casting News

3. The new welding technology of aluminum alloy automobiles 3.1 The laser welding technology of aluminum alloys Compared with the traditional welding technology, the laser welding...

Abstract: In the context of rapid economic development, people's demand for automobiles is gradually increasing, which promotes the rapid progress and development of the automobile industry....

In recent years, the demand for large-scale die-cast molds is increasing due to the continuous development of the domestic automobile industry, and the requirements for the yield, production efficiency,...

In recent years, energy-saving and emission reduction have become the trend of the times, and the lightweight of automobiles is also the general trend. Under these two major backgrounds, aluminum alloys...

2.2 The corresponding table of the thermal expansion coefficient of die steel material and die casting alloy material at different temperatures The three commonly used die casting materials...

The packing force of die castings changes dynamically from the beginning of the cooling of the aluminum alloy in the mold to the ejection of die castings. The mold materials and alloy materials have...

Draft angles The draft angle of the die casting process refers to the taper or slope which is perpendicular to the casting. The surface of the die casting part perpendicular to the parting line of the...

The composition of the white adhesion for the second defect has the main feature of having high O content. It is speculated that the main component of the white adhesion is...

The die-cast in aluminum alloy ADC12 has light weights, good thermal conductivity and corrosion resistance, which meets the requirements for lightweight, energy saving and emission...

The history of Bluetooth speakers In 1994, Ericsson created the Bluetooth technology. The early Bluetooth technology was not very good: the transmission speed was not fast and the...

Abstract: aiming at the problem of common super point cooling caused by the space limitation of die casting structure, a new super point cooling method was proposed, which can expand the space of point...

First, when the scaling defect occurs, check the changes in the workshop such as aluminum water temperatures, mold release agents, cooling water temperatures, etc. to see if there are variables that...