Page 4 of Die Casting News

2. The test results of aluminum alloy A356 2.1 Influence on the microstructure Figure 2 shows the microstructure of the samples obtained by the three casting methods, including PMC, LSC and SSC. The alloy...

Casting aluminum alloys are widely used in automobile manufacturing and aviation industry due to their excellent casting properties, good corrosion resistance, high specific strength and low production...

BMW strengthening competitiveness in aluminium moulds Experts from BMW's Light Metals in Landshut, Germany have come up with a multi-plate mold technology that can reduce carbon dioxide during machining...

Engineers are working on ingenious processes for manufacturing chassis components, and new designs for entire body components and aluminum platforms are starting to attract attention. Does this mean that...

Under the current general trend of lightweight development of automobiles, high-impact steel and aluminum alloy have become two materials which are used more. According to different processes, high-impact...

According to data released by the China Association of Automobile Manufacturers, in the whole year of 2021, China's automobile production and sales will reach 26.082 million and 26.275 million sets,...

(1) Welding wire When welding aluminum alloys by gas welding and argon tungsten arc welding, it is necessary to add filler wire. Aluminum and aluminum alloy welding wires are divided into two categories:...

There are many welding methods for aluminum alloys, and each method has different applications. In addition to traditional fusion welding, resistance welding, gas welding, some other welding such...

According to foreign media reports, Alumobility, a non-profit organization focused on promoting the application of aluminum auto body panels, released the latest research results. Studies have shown that...

2.2 Microstructure analysis of alloys Figure 3 shows the microstructure of the alloy at the hot crack position observed by an optical microscope. Its metallographic structure consists of primary...

Abstract: The causes of thermal cracking in the middle frame of die-cast ADC12 aluminum alloy mobile phone were analyzed by means of direct reading spectrometers, scanning electron microscopes and...

In the manufacturing process of die casting zinc alloys, the filling mode of molten metal is one of the key factors affecting the quality of castings. Many die casting defects such as lacking pouring,...